Fluidizer

• A device of tapered conical shape that, due to vibration, facilitates material flow from hoppers or silos.
• It consists of a seamless carbon or stainless steel cone manufactured on a sheet metal lathe, a seamless SINT engineering polymer seal with integrated upper and lower flange, suspensions for connection with the silo cone.

Chain Conveyors

Available Versions:

• normal
• for pit with side product inlet
• reversible
• single inclination / double inclination
• telescopic
• Range: from 40 to 400 t/h – different flow rates available on request

Belt Conveyor

• Ideal for handling cereals, oilseeds and legumes through horizontal or slightly tilted paths.
• They are designed to ensure the best performance even in the most difficult working conditions.
• Minimise maintenance costs and total operating costs…

Bucket Elevator

• Ideal for vertical handling of cereals, oilseeds and legumes.
• Designed and built to ensure the best performance even in the most difficult working conditions.
• Minimise maintenance costs and total operating costs.
• Range: from 20 to 400 t/h – different flow rates…

Diverter Valve

• Made of steel with a side seal in plastic material for dust sealing.
• All valves are equipped with inductive or mechanical sensors for controlling the position of the vanes.
  Available Versions:
• 2-ways, symmetric or asymmetric.
• 3-ways, manually (VD Series)…

Screw Conveyor

• Ideal for handling oilseed cereals and legumes on horizontal paths, even with moderate slopes.
• Designed and built to minimise maintenance and operating costs.
• Range: from 40 to 100 t/h – different flow rates available on request

Slide Gate

Each gate is made of a robust galvanized steel sheet body, with a steel blade moving inside.
Available Versions:

• Manually (SC Series).
• Motorized (SCM Series).
• Pneumatic (SP Series) operated.
• Longitudinal or crosswise opening, with square or rectangular inlet…

Air Blower

Kice air power units are suited for a wide range of applications such as:

• Positive and negative pressure conveying systems
• Fluidization systems
• Vacuum sweeper systems
• Filter systems and many other unique applications.

CR FILTER

• A common trade name for these type of filters is “big round filter”.
• Kice CR Series filters handle air volumes ranging from 20,000 – 50,000 CFM.
• They feature walk-in clean air chambers with top bag removal.
• A unique air inlet fitting removes up to 80% of dust prior to entrance into the dust chamber…

VS/S Series Filter

• Kice VS and S Series filters are square filters, available in 16-121 bag units handling air volumes up to 14,000 CFM.
• VS Series filters are VenturiJet models.
• S Series filters are PneuJet models.

VM/M Series Filter

• Kice VM and M Series filters are modular filters, available in 72-360 bag units handling air volumes up to 42,000 CFM.
• Modular filters can be shipped pre-assembled where the use of cranes is possible or shipped disassembled for installation in tight areas.
• Modular filters handle large volumes of air, yet remain short enough for indoor installation.

VR/R Series Filter

• Kice VR and R Series filters are round filters, available in 16-96 bag units handling air volumes up to 11,000 CFM.
• VR Series filters a VenturiJet models.
• R Series filters are PneuJet models.

Pneumatic Diverting & Converging Valve

• Converging valves makes it possible to receive the product from multiple locations while the Diverting valve makes it possible to send the product to multiple locations.
• Cast iron valves with tightly-machined clearances.
• Meeting the critical need to terminate a pneumatic conveying system at multiple…

Pneumatic Line Airlock

• VD Jet-Under Airlocks: BD airlocks have a jet-under design, which is a more efficient method of injecting product into the air stream.
• VPOT Blow-Thru Airlocks: VPOT are cast iron valves withoutboard bearings. They are commonly called “blow-thru” airlock valves.

Cyclone

• Designed for removing product from smaller diameter, pneumatic conveying lines.
• The height of the cyclones allow multiple cyclones to be “banked” on common benches. This allows for simple suction manifold installation on the cyclone’s air outlets.
• These units are completely welded and provide very affordable solutions to most industries.