VR/R Series Filter

• Kice VR and R Series filters are round filters, available in 16-96 bag units handling air volumes up to 11,000 CFM.
• VR Series filters a VenturiJet models.
• R Series filters are PneuJet models.

CR FILTER

• A common trade name for these type of filters is “big round filter”.
• Kice CR Series filters handle air volumes ranging from 20,000 – 50,000 CFM.
• They feature walk-in clean air chambers with top bag removal.
• A unique air inlet fitting removes up to 80% of dust prior to entrance into the dust chamber…

VS/S Series Filter

• Kice VS and S Series filters are square filters, available in 16-121 bag units handling air volumes up to 14,000 CFM.
• VS Series filters are VenturiJet models.
• S Series filters are PneuJet models.

VM/M Series Filter

• Kice VM and M Series filters are modular filters, available in 72-360 bag units handling air volumes up to 42,000 CFM.
• Modular filters can be shipped pre-assembled where the use of cranes is possible or shipped disassembled for installation in tight areas.
• Modular filters handle large volumes of air, yet remain short enough for indoor installation.

Compact Filter

• Integrated fan and cleaning system designed for simple installation, operation, and maintenance
• Designed for various cartridge configurations and lengths to handle a wide range of applications, materials, and air volumes
• Tool-free cartridge replacement to minimize maintenance and down-time

Square Inlet – VJ Series Airlock

• VJ Airlock: Clearances are kept between 0.003″ – 0.005.” Sizes range from 6″ – 30″ diameter rotors.
• VJOT Airlock: These valves, when used on the discharge of a baghouse filter, are approved as sealing devices per NFPA.
• VJH Airlock: Allows maintenance to be performed without disassembling the body…

Round Inlet – VL Airlock

• The VL line of airlocks are all fabricated airlocks capable of handling capacities from 1.5 cubic feet per revolution to 17.3 cubic feet per revolution.
• These valves are best utilized in a low-pressure system and come standard with flexible tipped rotors.

VBS Stainless Steel Airlocks

• These are heavy-duty fabricated, stainless steel units that are built when special materials, special design characteristics or other considerations are necessary.

Pneumatic Line Airlock

• VD Jet-Under Airlocks: BD airlocks have a jet-under design, which is a more efficient method of injecting product into the air stream.
• VPOT Blow-Thru Airlocks: VPOT are cast iron valves withoutboard bearings. They are commonly called “blow-thru” airlock valves.

CK Cyclones

• Kice CK cyclones are completely welded with angle ring reinforcing.
• They are designed for industrial applications that handle 500 – 50,000 CFM.
• Tests prove that Kice CK cyclones are as efficient as most “high efficiency cyclones” available in today’s market.

CE-CD-CC Cyclones

• Designed for removing product from smaller diameter, pneumatic conveying lines.
• The height of the cyclones allow multiple cyclones to be “banked” on common benches. This allows for simple suction manifold installation on the cyclone’s air outlets.
• These units are completely welded and provide very affordable solutions to most industries.

CH Series

• Designed for high efficiency and large air volumes.
• Available as asingle unit, or multiple unit configuration.

Horizontal Separators

• Designed to remove a decent percentage (75-85%) of a dust stream prior to it being introduced into a baghouse filter.
• The installation of a Kice Horizontal Separator ahead of a baghouse filter will greatly increase the life of filter bags.
• In general, the larger the particle size the greater the efficiency of these units.

Centrifugal Fans

• Kice FC Fans handle air volumes up to 50,000CFM with static pressures up to 20”wc.
• Kice FCW Fans are designed for negative pressure pneumatic conveying systems.
• Kice FA Fans feature an airfoil fan wheel that is designed to handle dust free air streams. They are more efficient and quieter that other fan designs.

Direct Drive Arrangement

• Arrangement #4: Direct drive units, typically designed for small volumes of air.

V-Belt Drives Arrangement

• Kice uses the highest quality v-belt drive assemblies available.
• Arrangement #9FB: Suitable for motor sizes through 40 hp.
• Arrangement #9F: The strongest fan bases available, suitable for any size motor.

Bullet Magnets

• Gravity-fed installations.
• Remove ferrous particles from dry free flowing products.
• Easily integrate into existing pipelines.
• A cone on top of the magnet system ensures the equal distribution of material for enhanced extraction.

Cleaning Station

• Maximum protection against ferrous and nonferrous debris.
• Purifies regrind and recycled goods in a plastics plant.

Drawer Filters

• Collect and separate contaminant ferrous metal from gravity fed, dry, free flowing materials.
• Specifically for the plastics industry.
• Feature temperature-compensated rare earth magnets.
• Compatible with high temperature (up to 80°C) applications.
• Durability and a reduction in downtime.

Forklift Stabilising Magnets

• Retain sheet steel loads,
• Constructed from low carbon steel.
• The former wound copper magnet coil is fixed into the magnet system & encapsulated in resin to insulate, protect from impact and prevent movement.

Liquid Traps

• Remove small and large ferrous metal contamination from materials transported in pipelines.
• The high-strength Neodymium Magnets capture both fine iron and larger tramp metal (e.g. nuts, rust, etc).

Magnetic Pulley

• Replaces the standard head pulley of a conveyor to provide continuous separation of disruptive tramp ferrous metal.
• Pulley options: Permanent magnetic head pulley and Electro magnetic head pulley.
• Manufactured to fit within your existing conveyor belt.

Magnetisers

• High-energy industrial BMC Series.
• Bench-top and laboratory models.
• Magnet setters and custom-built magnetizing fixtures.

Metal Detectors

• Sense and remove the presence of ferrous, non-ferrous and stainless metals in the process flow.
• Find metal encapsulated in the individual particle.
• Optional features allow you to network detectors for remote monitoring, reporting or control.

Overband Magnets

• Suspended over conveyors to separate or recover ferrous metal.
• Available in permanent and electromagnetic designs.
• Permanent Overband Magnets feature widely on mobile crushing and screening plant, as well as in quarries and recycling operations.

Plate + Hump Magnets

• Versatile and cost-effective magnetic separator.
• Remove occasional tramp ferrous metal from conveyed or gravity-fed product flows.

Pneumatic Inline Magnets

• Versatile and cost-effective magnetic separators.
• Connect into both gravity-fed and pneumatic pipelines.
• Ideal for removing occasional tramp ferrous metal from materials transported in pipelines.
• Constructed from stainless-steel with food-grade sanitary options.

Suspension Magnets

• Sit above conveyors to separate tramp ferrous metal.
• Available in permanent and electromagnetic versions.
• Cater for the ever-increasing size of conveyors, deeper troughs, and higher conveyor speeds.

Tube & Grate Magnets

• Used individually or in multi-row Grid arrays to remove problematic ferrous metal from processed materials.
• Prevent damage to processing equipment and protect product quality.
• Used in the food, plastics, ceramics and processing sectors.